Advance Partition Recovery for NTFS

The data recovery for the NTFS partition becomes essential if you have accidentally removed the data from one of the partitions. When the error occurs in the NTFS partition it may even result in the damage of a hard disk. Although, there are large number of causes which can cause the loss of data from the NTFS partition but one must be careful while using the methods. The overwriting of the files may even lead to the loss of data permanently. As a layman, it is not impossible for you to recover the data for the NTFS partition. All you need to do is to get familiar with all the steps which must be executed for the restoring of data back to the system from the hard disk. The most common error which you will see is as follows:

“Error occurred in the reading file: NTFS Error”

The simple method to resolve the error is just to replace the file with name NTFS.sys. Accomplishing this task will resolve the above mentioned error which usually occurs due to the corrupt file and the existence of viruses in the system. However, the replacement of the file consists of a complicated procedure and requires a thorough understanding. Hence, a novice may face a problem to replace the file. You can also use the other method to get the lost data back. The method is known as the 3^rd party data recovery software especially for the NTFS partition. With the help of the software you can easily find the location of the files and it will be easier for you to restore them. Such software is compatible with every operating systems be it the Microsoft Windows, MAC OS, Linux or the UNIX. The recovery of data is also possible with the help of different storage Medias like CDs, pen drives, USB drives etc. containing the NTFS file system either in the compressed or the uncompressed forms.

The NTFS is the acronym for the New Technology for the file system. It holds the key responsibility of storing the documents and data in the safe form and it is being used by the large number of computer users to accomplish the daily tasks. You can also use the advance partition recovery tools which you will get along with the NTFS partition recovery software; however, you have to execute a scanning algorithm in order to get the benefits from the tools. So, if you are at home in programming, then this option is also open for you which can be used at the time of loss of data. Also, if you are thinking about using the tools then make sure that you have short listed the compatible and the cost effective tools. 

Free Download Windows Data Recovery

Above all, you can also look for the trial or the demo version of these tolls to check their performance and the reliability and moreover, you don’t need to pay any charges to run the scanning process using the advance partition recovery software tools.

There are different type of data recovery softwares are available such as

OST to PST Conversion Software
Windows Data Recovery
NSF to PST Conversion
Email Conversion Software

How to Recover Data If the Active Partition is Unable to Boot

In the windows system, the Microsoft management console (MMC) module provides disk management. This function enables you to administer the system disks like marking partitions as active, creating or deleting partitions and so on.  However, the system may not boot sometimes, in case you mark a partition as active. This can happen due to several reasons. There are numerous ways to resolve this situation. Different methods can be performed to solve this problem. In case, these different methods are not capable of resolving the situation in the required way then advance partition recovery software can be used to do so.

Suppose you consider a scene having windows 2000. You have marked the primary partition as the active partition with the help of disk management utility. However, the marked partitions do not include the imperative boot files. So, when you start your computer system now, it fails to boot and displays an error message saying, “NTLDR is missing”. The major cause of this situation is that the boot files are absent in the marked archive partition and that’s why the system is not able to boot. 

In case of the Intel-based systems, marked archive partitions are the primary partitions that are situated internally on the disk. There can be only one single active partition at one particular point of time. When you decide to install and use another operating system then be sure that you mark its system partition as active before restarting the system. Generally, the boot files contain ntdetect, ntldr and boot.ini.

Various methods can be followed for data recovery  and to resolve this situation. One of the methods is that you can change the active partition with help of a floppy disk to boot and then use the disk utilities to manually change the active partition. Another method would be looking to install a different windows instance in a parallel location but there should be enough disk space, when you decide to opt for this method. Once the installation is done you should use the disk management utility and change the active partition. 


The next method says that you should enter the windows data recovery console and use the fix boot command to boot the active partition. Once the system has been booted, you should change the active partition from the disk management function, then you can restart the computer and the system will be working fine now.

Free Download Windows Data Recovery

Even after trying out all these methods, you are unable to boot the system then you can go for third party data recovery software to reinstate the trapped data. These read-only tools have a rich user interface. The rich user interface can help you easily recover partition. After trying out so many different ways, you will certainly use advance  partition recovery software even if the archive partition is unable to boot.
There are different type of data recovery softwares available in the market. Some the most important softwares are listed below:

OST to PST Converter

email conversion software

nsf to pst conversion

How to Recover Data Lost Due to the Damage of NTFS Partition

There are many system manufacturers around who try and provide the best OS so that they do not crash and cause errors. Despite of all this none of the OS developed so far has been free form errors. Every system and OS is prone to crashes, these crashes though common prove to be fatal when there is important data stored on the system without a backup of the data.

The crashes of the system can be due to various reasons. Whatever the reason is the error does not allow the OS to load and thus the system does not work. All the data stored on the system becomes inaccessible and sometimes the data stored is even lost permanently. This is the reason that it is advised that one always uses third party data recovery software for the recovery of the data.

The data recovery software helps to map the lost data and helps to recover data files. The advance partition recovery software can also helps in hard disk data recovery. Data loss in a system can be due to variety of reasons; some can be due to manual errors. In some cases the system crashes occur due to external errors in the system. Very often it has been observed that one gets a system with a higher version of the OS but due to limited functionality downgrades it to the lower version. In such cases there can be cases of NTFS partition data loss. When this occur the NTFS partition data loss occurs and one sees an error that does not allow the OS to load and error says that:

'Windows could not start because the following file is missing: 
\system32\drivers\ntfs.sys'

The NTFS files are system files that help the system to boot, and when the system loses these files one has to reload the NTFS files on the active partition of the hard disk to make the system work again as normal. One can adopt the following simple steps to correct the NTFS file error on the system. For this one will have to boot the system with the help of the CD with the system files. To boot the system from the CD Rom one has to activate the CD Rom as the booting device in the BIOS and then restart the system by inserting the CD in the external drive. 


This helps the system to boot with the help of the CD. Once that is done one needs to activate the  data recovery console by pressing the R button. As the recovery console loads one has to type in the following commands that would help to recover and copy the lost NTFS file from the CD to the active partition of the Hard disk.

cd system32 
ren ntkrnlpa.exe ntkrnlpa.old 
ren ntoskrnl.exe ntoskrnl.old 
cd "c:\windows\driver cache\i386" 
expand sp2.cab -F:ntkrpamp.exe c:\windows\system32 
expand sp2.cab -F:ntkrnlmp.exe c:\windows\system32 
cd c:\windows\system32 
ren ntkrpamp.exe ntkrnlpa.exe 
ren ntkrnlmp.exe ntoskrnl.exe

Free Download Windows Data Recovery

This command helps to repair the system files and reload them on the system. These steps help to correct the NTFS partition error on the system.
There are different type of data recovery softwares available in the market. Some the most important softwares are listed below:

OST to PST Converter

email conversion software

nsf to pst conversion

Data Loss Due to Improper Partition of the Hard Drive

The hard disk is the most important hardware of the computer. Advance partition of the hard disk is very important as the partition of the hard disk determines a lot of things.  The hard disk stores the important data and thus the partition of the disk is important. The hard disk can be partitioned when the hard disk is set for formatting. When a new system is purchased the hard disk if set for formatting, and at this time the hard disk is fragmented into different drives. One can make a maximum of four partitions of the hard disk. 

One of the partitions is used as the boot partition, this partition is made active. The boot files are kept on the drive which I made active for the booting and the start up of the system.  The operating system files are also placed on the active partition that helps in the booting of the system.  No more than one partition can be made active for booting as it disrupts the boot of the systems and the system might give an error while the boot is in progress. 

Similarly activation of at least one partition of the hard disk is also important as if any one of the partition is not active the system might not boot at all and the BIOS would be unable to find a active boot device. Proper partitioning of the hard drive is very important for the protection of the critical data on the system.

The hard disk of a system is partitioned for the safety and the security of the data. The partition of the hard disk ensures the safety of the data in many ways. If the hard disk is not partitioned and a single drive is used for the system if the system falls prey to any external threat like the virus attack or the registry files disruption the entire hard disk gets corrupted and thus the entire data on the system is lost. 

The partition of the hard disk saves the system from such problems. If one of the portioned drive saves the data, even if one of the partition gets corrupted the data on the others are safe.  The corrupted partition of the disk can be repaired by the formatting of the disk. The formatting erases the data on the disk and thus everything on the disk is lost. Thus when the disk is partitioned even If one disk is corrupted the other partition is safe for data recovery. And the data stored is safe. 

Free Download Windows Data Recovery

The partition of the hard disk which has the boot files need to keep safe from the daily use files as if they are corrupted the system might not start up at all and it might require advance partition recovery of the system. The advanced storage system helps in the storage of the important data, so if a system has important data advanced back systems is must recommended and important. One can trust the hard disk data recovery solutions for the recovery of the data in case of data storage.
There are different type of data recovery softwares available in the market. Some the most important softwares are listed below:

OST to PST Converter

email conversion software

nsf to pst conversion